Smith Chart Promo 613117d6a40e8

Back to Basics: Impedance Matching

June 5, 2020
Impedance matching is easy if you know the basics.

This article series is in the Analog topic within our Series Library.

The term “impedance matching” is rather straightforward. It’s simply defined as the process of making one impedance look like another. Frequently, it becomes necessary to match a load impedance to the source or internal impedance of a driving source. A wide variety of components and circuits can be used for impedance matching. This series summarizes the most common impedance-matching techniques.

Download the complete PDF eBook on Back to Basics: Impedance Matching.

You can also read the individual articles online.

Ryzhov Sergey | Dreamstime.com
Mixed Signal Oscilloscope Promo
Analog

Impedance Matching: Essential Design Knowledge

Lou Frenzel breaks down the all-important process of impedance matching, which particularly strikes at the hearts of RF engineers.
Lym Jzoom | Dreamstime.com
Radio Waves Promo
Communications

Back to Basics: Impedance Matching (Part 1)

The term “impedance matching” is rather straightforward. It’s simply making one impedance look like another like matching a load impedance to the source or internal impedance....
Cornelius20 | Dreamstime.com
Soundwaves Promo
Communications

Back to Basics: Impedance Matching (Part 2)

The L-network is a simple inductor-capacitor (LC) circuit that can be used to match a wide range of impedances in RF circuits. Any RF circuit application covering a narrow frequency...
Im Part 3 Fig 5
Communications

Back to Basics: Impedance Matching (Part 3)

An article about how to design basic impedance matching networks using the pi and T-networks for improved selectivity.
Wacomka, Dreamstime.com
Music 144229142 © Wacomka Dreamstime
Analog

Automatic Impedance Matching in RF Design

This article takes a look at the different techniques used to get an antenna to tune itself for maximum effect.
Audrius Merfeldas, Dreamstime.com
Smith Charet Audrius Merfeldas Dreamstime com
Analog

Impedance Matching Basics: Smith Charts

This article offers an introduction to the Smith chart and how it’s used to make transmission-line calculations and fundamental impedance-matching circuits.

Sponsored Recommendations