Multichip Modules Enable Megahertz Switching
Jan 10, 2007 2:24 PM
News & Features From Auto Electronics
Committed to improving hybrid electric cars
New Motors for Hybrid Vehicles
Battery Firms Battle for Hybrid Hegemony
Innovative Bipolar Plates for Fuel Cells
See More Headlines
Top Articles
Exploring Current Transformer Applications
Ultracapacitor Technology Powers Electronic Circuits
Buck-Converter Design Demystified
Sensorless Motor Control Simplifies Washer Drives
PET Resources
Buyer's Guide
Conferences
Engineering Jobs
Power Electronics Events
Rent Our Lists
Spotlight on Digital Power
Fairchild Semiconductor will soon be releasing a suite of products, the FET plus Driver Multichip Module family, designed specifically to support Intel’s Vcore standard for converters. According to Guy Moxey, director of the low-voltage market segment at Fairchild, the layout and size of the switches and driver die are thermally and electrically optimized to enable switching frequencies in the megahertz range.
The modules are housed in Fairchild’s micro leadframe package, the 40-pin version sized at 6 mm x 6 mm, or the 56-pin version sized at 8 mm x 8 mm. Within the device, three N-channel MOSFETs and one driver chip contain the power stage for a single phase. The high-side MOSFET is optimized for fast switching, and two low-side MOSFETS are connected in parallel for the low side.
This arrangement is well suited for the low-duty-cycle switching needed to convert the 12 V from the supply bus to supply up to 30 A to a processor core at 1.1 V to 1.2 V. The upper device is optimized for switching speed, and the lower devices are optimized for low RDS(ON). To support current-mode control, current can be sensed either internally through connections to the low-side devices, or externally through a sense resistor.
Lacking passive components, the devices are not true modules because they were developed with a focus on semiconductor device optimization. This allows flexibility by allowing designers to select the optimal output inductor and capacitor for the application. Further flexibility will be provided by the offering range within the family, which is grouped according to target efficiencies of 85%, 82% and 80% to cover the full range of value and performance in computing platforms.
Extending the concept of enhanced packaging for discrete devices, the family provides an additional efficiency gain of 1.5% to 2% for peak- and steady-power levels over discrete solutions using D-Pak packaging. Normally, parasitic elements along circuit pathways in these discrete solutions would significantly reduce efficiency at frequencies beyond 500 kHz. The layout within the integrated packaging minimizes these parasitics and allows operation in the MHz range.
