Power Electronics



ENERGY STAR Gets Tougher For Washers, Covers More CFLs

Mar 11, 2008 3:40 PM


The U.S. Department of Energy (DoE) has announced more stringent criteria for clothes washers and additional categories of compact fluorescent lightbulbs (CFL) under the ENERGY STAR label. The more stringent requirements for clothes washers carrying the ENERGY STAR label will take effect in two phases. In order to qualify, clothes washers must be a minimum of 43% more efficient than current federal energy efficiency standards with a maximum water factor (WF) of 7.5, as of July 1, 2009.

As of January 1, 2011, clothes washers must be a minimum of 59% more efficient with a maximum WF of 6.0. WF measures the water efficiency and is calculated as gallons of water used per cubic foot of capacity—the lower the WF, the more efficient the clothes washer.

In addition to the expansion of eligible product categories for CFLs, the new criteria limits, for the first time, the amount of mercury that CFLs can contain to less than 5 milligrams for most bulbs, expands the program to include candelabra-based CFLs, incorporates a third-party testing program for all bulbs effective in November of 2008, tightens lamp color requirements, and adds high-heat testing requirements for reflector products. Revised ENERGY STAR criteria for CFLs takes effect December 2, 2008 - 270 days from issuance of criteria.

Following the 2011 criteria change for clothes washers, consumers are expected to save $120 million on utility bills annually, 11.2 billion gallons of water, and 659 million kilowatt hours of electricity. Current ENERGY STAR-qualified clothes washers use 75% less energy than clothes washer models manufactured in 1980.


Acceptable Use Policy blog comments powered by Disqus


April 1, 2009
power electronics technology magazine current issue cover
Advertisement




Power Systems News

Broad Range of EMI Filters

Industry's Smallest Integrated Power Stage (iPSTM)

New Jersey Utility to Build 120MW of Solar Capacity

XP Vehicles Expects U. S. DOE ATVM Funding to Complete Development of Revolutionary Electric Vehicle

Triple Output 500W Medical Grade Power Supplies

 
Back to Top

Topic Index

Discrete Semis
Bipolar Transistors
IGBTs
Power Modules
Power MOSFETs
Rectifiers/Diodes
Thyristors

Power Management
Digital Power Control
High-Voltage Devices
LED Drivers
Lighting Power Management
Motor Power Management
Power ICs
PWM Controllers
Regulator ICs

Portable Power Management
Batteries
Battery Charger ICs
Fuel Gauges Controllers and Regulators
Micro Fuel Cells

Passives/Packaging
Capacitors
Circuit Protection Devices
Connectors
Magnetics
Packaging
Printed Circuit Boards
Resistors
Sensors & Transducers
Switches & Electromagnetic Relays

Topic Pages
Wind Power
Flyback Transformers

Thermal Management
Fans
Heatpipes & Spreaders
Heatsinks
Liquid Cooling
Thermal Interface Materials
Thermal Management Simulation

Power Systems
DC-DC Converters
Distributed Power Architectures
EMI & EMC
Linear Power Supplies
Safety/Environmental Approvals
Simulation/Modeling
Switch-Mode Power Supplies
Test & Measurement Uninterruptible Power Supplies

Digital Power
Commentaries
Digital Power News
Digital Power Products
Design Features


Contact Us  E-mail Webmaster  For Advertisers  For Search Partners  Privacy Statement  Subscribe  Terms of Use
© 2009 Penton Media, Inc. All rights reserved.