Power Electronics


Input, Hermetically-Sealed, DC-DC Converters Handle 25% More Power

Jan 13, 2003 12:00 PM, Edited by PE Tech Staff

International Rectifier's IR® Advanced Analog group has introduced two hermetically sealed, 120V input dc-dc converters that handle up to 84W per cubic inch power density and deliver up to 80% efficiency. The new AFL12005S delivers 16A at 5V output, and the AFL1203R3S delivers 20A at 3.3V output. The AFL12005S handles up to 25% more power at 5V than the closest competing device. The AFL1203R3S is the industry's first hermetically sealed 120V input, 3.3V output dc-dc converter made available in a 3-in. × 1.5-in. × 0.38-in. package. The new converters are designed for military and other high-reliability systems, including instrumentation and experiments aboard Space Station Freedom.

The AFL120 series converters are fully functional, self-contained dc-dc converters with an input range from 80V to 160V, characterized and rated over the full military temperature range of -55ºC to 125°C. They expand the IR high-reliability (hi-rel) line of single- and dual-output voltage dc-dc converters operating from 28V to 270V input with output power ranging from 66W to 120W.

These devices are available with one of four screening levels to satisfy a variety of requirements. The CH grade is fully compliant to the requirements of MIL-PRF-38534 for class H and is tested to meet the complete group "A" test specification over the full military temperature range without output power de-rating.

Tiva Bussarakons, director, technical marketing at International Rectifier's Advanced Analog Group, said, “The AFL120 series converters offer one of the highest power density converters on the market. The new converters deliver their full-rated current under all normal operating conditions, including the full military temperature range. Multiple devices can be used in parallel with full current and stress sharing to increase capacity even further.”

The new converters incorporate proprietary magnetic pulse feedback technology, providing optimum dynamic line and load regulation response. This feedback system samples the output voltage at 550 kHz, the nominal pulse width modulator fixed clock frequency.

Manufactured in a facility fully qualified to MIL-PRF-38534, the converters are available in four screening grades. Variations in electrical, mechanical, and screening can be accommodated. Contact International Rectifier's Advanced Analog Group for special requirements at (408) 727-0500.






April 1, 2012
power electronics technology magazine current issue cover




 
Back to Top

Topic Index

Discrete Semis
Bipolar Transistors
IGBTs
Power Modules
Power MOSFETs
Rectifiers/Diodes
Thyristors

Power Management
Digital Power Control
High-Voltage Devices
LED Drivers
Lighting Power Management
Motor Power Management
Power ICs
PWM Controllers
Regulator ICs

Portable Power Management
Batteries
Battery Charger ICs
Fuel Gauges Controllers and Regulators
Micro Fuel Cells

Passives/Packaging
Capacitors
Circuit Protection Devices
Connectors
Magnetics
Packaging
Printed Circuit Boards
Resistors
Sensors & Transducers
Switches & Electromagnetic Relays

Topic Pages
Wind Power
Flyback Transformers

Thermal Management
Fans
Heatpipes & Spreaders
Heatsinks
Liquid Cooling
Thermal Interface Materials
Thermal Management Simulation

Power Systems
DC-DC Converters
Distributed Power Architectures
EMI & EMC
Linear Power Supplies
Safety/Environmental Approvals
Simulation/Modeling
Switch-Mode Power Supplies
Test & Measurement Uninterruptible Power Supplies

Digital Power
Commentaries
Digital Power News
Digital Power Products
Design Features


Contact Us  E-mail Webmaster  For Advertisers  For Search Partners  Privacy Statement  Subscribe  Terms of Use
© 2011 Penton Media, Inc. All rights reserved.