With Integrated Modules, Reliability Must Be Designed In Too

Jul 31, 2007 3:36 PM
By Alan Elbanhawy, Director, Advanced Power System Center, Fairchild Semiconductor International, San Jose, Calif.

The world of power delivery is currently going through a very exciting time now that several major semiconductor companies are offering integrated power modules. Some of these devices combine the PWM controllers, gate drivers and switching MOSFETs in one package. With these modules, you only need to design the input and output filters, and you have got an optimized dc-dc converter. What’s more, these devices usually operate at high switching frequencies, which results in smaller footprints when compared to discrete solutions.

These integrated dc-dc modules are usually offered for load currents less than 10 A. Among these components, almost all of the lower-current devices (<2 A) are monolithic. Another category of integrated modules — the DrMOS class of devices — targets higher current dc-dc applications.

Designed for use in synchronous buck converters, DrMOS devices comprise the gate drivers, the control MOSFET and the synchronous rectifier, and can deliver currents ³30 A per module. These modules are intended for use in servers and PCs, where multi-phase synchronous buck converters are the topology of choice.

With all of these types of modules, the main advantages are high performance, small footprints and reduced development efforts for the design engineer. Using these modules saves design, component selection and prototyping time. However, all of these advantages must come to the market with a high degree of reliability guaranteed by the supplier.

Though the electrical design of these modular subsystems is inherently complex, this complexity is compounded by requirements for high-speed current switching, power dissipation management, package thermal resistance and thermal performance in elevated ambient temperatures. These are just a few of the factors that affect a module’s reliability.

All of this demands a rigorous design approach, design verification and final testing of the device. In multi-chip modules (MCMs), the design of each individual component must be optimized as a part of a subsystem not as simply a stand-alone device. In other words, each component’s performance and interface parameters must be a perfect fit for every other component it interacts and interfaces with. This clearly means that even the best-in-class, mass-produced general-purpose devices may not be thrown together to make a module, but rather the module specifications must dictate the individual specification of its parts.

Want to use this article? Click here for options!
© 2007 Penton Media, Inc.